Anbang Pump Industry - Providing the world with high-quality water pumps and services.

language

Home

IS type clear water centrifugal pump

IS type pumps are single-stage, single-suction centrifugal pumps, and are the updated version of B and BA type water pumps. They are suitable for industrial and urban water supply and drainage, and can also be used for agricultural irrigation and drainage. They are used for transporting clean water and other liquids with physical and chemical properties similar to clean water, with a temperature not exceeding 80℃.

Contact Information

Email:sales@abpumps.com

Mobile/WeChat:+8615188618168

Category:

Centrifugal pump

Keywords:

Centrifugal pump

Inquiry Now

Overview

IS type pumps are single-stage, single-suction centrifugal pumps, and are the updated version of B and BA type water pumps. They are suitable for industrial and urban water supply and drainage, and can also be used for agricultural irrigation and drainage. They are used for transporting clear water and other liquids with physical and chemical properties similar to clear water, with a temperature not exceeding 80℃.

The ISR type is a series of hot water pumps designed by our company according to internationally standardized performance and dimensions. They are suitable for hot water boiler water supply and hot water circulation systems, and can also be used for industrial and urban water supply and drainage, but the temperature should not exceed 150℃.

Performance Range

Speed	2900r/min and 1450r/min
Inlet Diameter	50-200mm
Flow Rate	6.3-400m³/h
Head	5-125m

Pump Marking

(For example, IS(R)80-65-160)

IS(R)--Single-stage, single-suction centrifugal pump for clear water (hot water circulation pump)

80--Inlet diameter (mm)

65--Outlet diameter (mm)

160--Nominal impeller diameter (mm)

A--Impeller cutting grade

J (also D)--Speed reduction pump

Pump Selection

Users should pay attention to the following points when selecting pump specifications:

(1) The flow rate of the selected water pump should be less than the normal water output of the well or other water source.

(2) The head of the selected water pump should be based on the actual required head, and the pipeline losses of the water pump should be considered.

(3) When selecting a water pump, the temperature of the transported fluid should be considered and must be lower than the specified temperature.

(4) When selecting a water pump, the installation height of the water pump should be considered, that is, the vertical distance from the suction liquid surface to the pump axis, which must be lower than the height specified by the water pump.

Adaptable to all industries Anbang Pump Industry provides one-stop pumping solutions

No matter what industry you are in or what pumping challenges you face, Hebei Anbang Pump Industry can tailor the most suitable solution for you with its professional R&D team, rich product line and customized service capabilities, and become a solid backing for your business development with excellent products and intimate services.

Get a quote now ↓

Related Products

CZ type chemical pump

The CZ series standardized chemical pumps are horizontal, single-stage, single-suction centrifugal pumps; their dimensions and performance comply with DIN24256/ISO2858 standards. The performance range of the CZ series standardized chemical pumps includes all the performance of the IH series standardized chemical pumps, and its efficiency, cavitation performance and other indicators exceed those of the IH type pumps. It can be replaced with the IH type pump on a single-machine basis.

D, ZJD type single-shell slurry pump

The D(ZJD) series single-shell pump is suitable for transporting abrasive or corrosive slurries containing solid particles in industries such as power, metallurgy, coal, and building materials. The maximum slurry concentration of solid-liquid mixtures that it can transport is: 45% for ash slurry and coal slurry, and 60% for heavy media.

DT and TL desulfurization pumps

The DT and TL series desulfurization pumps are a new generation of high-efficiency desulfurization pumps, carefully developed by absorbing the advanced technologies of similar products at home and abroad, targeting the characteristics of pumps used in flue gas desulfurization. The maximum flow rate of the pump can reach 12000 m³/h, and the pump head is generally below 100 m, covering all operating conditions of pumps used in desulfurization systems. It can be used as a large slurry circulation pump for absorption towers, limestone slurry transport pump, gypsum slurry discharge pump, recovery pump, sump pump, etc.

FSB and FSB-L type fluoroplastic alloy corrosion-resistant pumps

Our company mainly produces FSB and FSB-L type fluoroplastic alloy pumps, suitable for long-term conveying of strong oxidants and organic solvents with any concentration and without solid particles under the temperature condition of -30℃~160℃. The flow passage is entirely made of fluoroplastic alloy, featuring extremely strong corrosion resistance, high mechanical strength, no aging, and no toxic decomposition. Its service life is 3-4 times that of stainless steel pumps.

< 1 2 3 >