Anbang Pump Industry - Providing the world with high-quality water pumps and services.

language

Home

DT and TL desulfurization pumps

The DT and TL series desulfurization pumps are a new generation of high-efficiency desulfurization pumps, carefully developed by absorbing the advanced technologies of similar products at home and abroad, targeting the characteristics of pumps used in flue gas desulfurization. The maximum flow rate of the pump can reach 12000 m³/h, and the pump head is generally below 100 m, covering all operating conditions of pumps used in desulfurization systems. It can be used as a large slurry circulation pump for absorption towers, limestone slurry transport pump, gypsum slurry discharge pump, recovery pump, sump pump, etc.

Contact Information

Email:sales@abpumps.com

Mobile/WeChat:+8615188618168

Category:

Desulfurization pump

Keywords:

Desulfurization pump

Inquiry Now

Product Introduction

The DT and TL series desulfurization pumps are a new generation of high-efficiency desulfurization pumps, specially designed for the characteristics of flue gas desulfurization pumps, and incorporating advanced technologies from similar products at home and abroad. ³ The maximum flow rate can reach 12000m³/h, and the pump head is generally below 100m, covering all operating conditions of desulfurization system pumps. They can be used as large slurry circulation pumps for absorption towers, limestone slurry transport pumps, gypsum slurry discharge pumps, recovery pumps, sump pumps, etc.

Model Significance

Horizontal Desulfurization Pump

300T -- Pump outlet diameter 300mm

DT -- Horizontal Desulfurization Pump

1 -- Flow passage material: 1 for C1; 2 for C2; 3 for C3; GLH-5 is not marked

A -- Number of impeller blades. A is 5; B is 4; C is 3; D is 2; E is 1; F is 6; G is 7

60(58) -- Impeller diameter cut from 60cm to 58cm from the prototype pump

B -- Special structure code: B indicates a semi-open impeller. Normal structure is not indicated

Vertical Desulfurization Pump

65 -- Pump outlet diameter 65mm

TL -- Vertical Desulfurization Pump

1 -- Flow passage material. 1 for C1; 2 for C2; 3 for C3; GLH-5 is not marked

A -- Number of impeller blades. A is 5; B is 4; C is 3; D is 2; E is 1; F is 6; G is 7

30(28) -- Impeller diameter cut from 30cm to 28cm from the prototype pump

L -- Special structure code. L indicates a two-stage shaft; B indicates a semi-open impeller; normal structure is not indicated

Adaptable to all industries Anbang Pump Industry provides one-stop pumping solutions

No matter what industry you are in or what pumping challenges you face, Hebei Anbang Pump Industry can tailor the most suitable solution for you with its professional R&D team, rich product line and customized service capabilities, and become a solid backing for your business development with excellent products and intimate services.

Get a quote now ↓

Related Products

CZ type chemical pump

The CZ series standardized chemical pumps are horizontal, single-stage, single-suction centrifugal pumps; their dimensions and performance comply with DIN24256/ISO2858 standards. The performance range of the CZ series standardized chemical pumps includes all the performance of the IH series standardized chemical pumps, and its efficiency, cavitation performance and other indicators exceed those of the IH type pumps. It can be replaced with the IH type pump on a single-machine basis.

D, ZJD type single-shell slurry pump

The D(ZJD) series single-shell pump is suitable for transporting abrasive or corrosive slurries containing solid particles in industries such as power, metallurgy, coal, and building materials. The maximum slurry concentration of solid-liquid mixtures that it can transport is: 45% for ash slurry and coal slurry, and 60% for heavy media.

DT and TL desulfurization pumps

FSB and FSB-L type fluoroplastic alloy corrosion-resistant pumps

Our company mainly produces FSB and FSB-L type fluoroplastic alloy pumps, suitable for long-term conveying of strong oxidants and organic solvents with any concentration and without solid particles under the temperature condition of -30℃~160℃. The flow passage is entirely made of fluoroplastic alloy, featuring extremely strong corrosion resistance, high mechanical strength, no aging, and no toxic decomposition. Its service life is 3-4 times that of stainless steel pumps.

< 1 2 3 >