Anbang Pump Industry - Providing the world with high-quality water pumps and services.

language

Home

S, SH type double suction centrifugal pump

S, SH type pumps are single-stage, double-suction, and center-split casing centrifugal pumps used for pumping clean water and liquids with physical and chemical properties similar to water. For this pump type, when the head is between 9 meters and 140 meters, and the flow rate is between 126 cubic meters per hour and 12500 cubic meters per hour, the maximum liquid temperature should not exceed 80℃. They are suitable for use in factories, mines, urban water supply, power plants, large-scale water conservancy projects, agricultural irrigation, and drainage. The 48SH-22 type large pump can also be used as a circulating pump in thermal power plants.

Contact Information

Email:sales@abpumps.com

Mobile/WeChat:+8615188618168

Category:

Centrifugal pump

Keywords:

Inquiry Now

Overview

S and SH type pumps are single-stage, double-suction, horizontally split centrifugal pumps used for pumping clean water and liquids with similar physical and chemical properties. For heads ranging from 9 meters to 140 meters and flow rates from 126 cubic meters per hour to 12500 cubic meters per hour, the maximum liquid temperature should not exceed 80℃. These pumps are suitable for use in factories, mines, municipal water supply, power plants, large-scale water conservancy projects, agricultural irrigation, and drainage. The 48SH-22 type large pump can also be used as a circulating pump in thermal power plants.

Meaning of Pump Model: For example, 10SH-13A
10: The suction port diameter divided by 25 (i.e., the suction port diameter of this pump is 250 mm)
S, SH: Single-stage, double-suction, horizontal centrifugal clear water pump
13: Specific speed divided by 10 (i.e., the specific speed of this pump is 130)
A: Indicates that the pump has a different outer diameter impeller

Structural Description

The suction and discharge ports of the S and SH type pumps are both located below the pump shaft centerline in a horizontal direction, perpendicular to the axis. The pump cover is fixed to the pump body using double-headed bolts and conical locating screws, allowing for easy opening to inspect all parts inside the pump without removing the inlet and outlet pipes or the motor. Therefore, maintenance is extremely convenient. Viewed from the direction of rotation, SH type pumps rotate counterclockwise; S type pumps rotate clockwise.

The main parts of the S and SH type pumps are: pump body (1), pump cover (2), impeller (3), shaft (4), double suction sealing ring (5), shaft sleeve (6), bearing housing (14).

Pump body (1): Made of cast iron. Forms the impeller chamber together with the pump cover. The flanges of the inlet and outlet flow passages have pipe screw holes for installing vacuum and pressure gauges. A pipe screw hole for draining is located at the lowest point of the neck.
Pump cover (2): Made of cast iron. The upper part has pipe screw holes for installing the water seal pipe and vent pipe, and a hook for lifting the pump cover.
Impeller (3): Made of cast iron, with a symmetrical shape and twisted blades between the two walls. The liquid enters the impeller from both sides. It undergoes static balance testing during manufacturing.
Shaft (4): Made of high-quality carbon steel. The impeller is located in the center of the shaft and is fixed using a key, shaft sleeve, and shaft sleeve nuts on both sides. The right end of the shaft is for installing the coupling, and is connected to...

Adaptable to all industries Anbang Pump Industry provides one-stop pumping solutions

No matter what industry you are in or what pumping challenges you face, Hebei Anbang Pump Industry can tailor the most suitable solution for you with its professional R&D team, rich product line and customized service capabilities, and become a solid backing for your business development with excellent products and intimate services.

Get a quote now ↓

Related Products

IS type clear water centrifugal pump

IS type pumps are single-stage, single-suction centrifugal pumps, and are the updated version of B and BA type water pumps. They are suitable for industrial and urban water supply and drainage, and can also be used for agricultural irrigation and drainage. They are used for transporting clean water and other liquids with physical and chemical properties similar to clean water, with a temperature not exceeding 80℃.

LG, DL type vertical multistage pump

LG, LGR, DL, and DLR series high-rise building water pumps are vertically mounted multi-stage centrifugal pumps widely used in domestic construction projects and various industries. They are high-efficiency and energy-saving products that are key promotion items of the Ministry of Mechanical Industry. This series of pumps features high efficiency, low noise, small size, light weight, small footprint, and convenient installation and maintenance.

HW type mixed flow pump

HW type pumps are horizontal, single-stage, single-suction, volute mixed-flow pumps. Suitable for conveying clear water or other liquids with physical and chemical properties similar to water. The temperature of the liquid being conveyed should not exceed 50℃. Widely used in various occasions such as agricultural irrigation, industrial and urban water supply and drainage.

IHF type fluorinated chemical centrifugal pump

The IHF fluoroplastic-lined pump is a single-stage, single-suction chemical centrifugal pump. It is designed and manufactured according to international standards and incorporates metal fluoroplastic-lining processing technology. The pump casing, impeller, pump cover, and other flow components in contact with the medium are all steel structures with fluoroplastic lining.

< 1 2 3 >