Mongolia IS type clear water centrifugal pump

IS type pumps are single-stage, single-suction centrifugal pumps, and are the updated version of B and BA type water pumps. They are suitable for industrial and urban water supply and drainage, and can also be used for agricultural irrigation and drainage. They are used for transporting clean water and other liquids with physical and chemical properties similar to clean water, with a temperature not exceeding 80℃.

Product Description

Overview

IS type pumps are single-stage, single-suction centrifugal pumps, and are the updated version of B and BA type water pumps. They are suitable for industrial and urban water supply and drainage, and can also be used for agricultural irrigation and drainage. They are used for transporting clear water and other liquids with physical and chemical properties similar to clear water, with a temperature not exceeding 80℃.

The ISR type is a series of hot water pumps designed by our company according to internationally standardized performance and dimensions. They are suitable for hot water boiler water supply and hot water circulation systems, and can also be used for industrial and urban water supply and drainage, but the temperature should not exceed 150℃.

Performance Range

Speed 2900r/min and 1450r/min
Inlet Diameter 50-200mm
Flow Rate 6.3-400m3/h
Head 5-125m

Pump Marking

(For example, IS(R)80-65-160)

IS(R)--Single-stage, single-suction centrifugal pump for clear water (hot water circulation pump)

80--Inlet diameter (mm)

65--Outlet diameter (mm)

160--Nominal impeller diameter (mm)

A--Impeller cutting grade

J (also D)--Speed reduction pump

Pump Selection

Users should pay attention to the following points when selecting pump specifications:

(1) The flow rate of the selected water pump should be less than the normal water output of the well or other water source.

(2) The head of the selected water pump should be based on the actual required head, and the pipeline losses of the water pump should be considered.

(3) When selecting a water pump, the temperature of the transported fluid should be considered and must be lower than the specified temperature.

(4) When selecting a water pump, the installation height of the water pump should be considered, that is, the vertical distance from the suction liquid surface to the pump axis, which must be lower than the height specified by the water pump.

 

Inquiry Now

Please fill out this form and we will contact you on the next working day.

Submit Now
%{tishi_zhanwei}%